Filter
Top Products
WWW.TALKSWITCH.COM 3
TS-200 USER GUIDE
PART CHECKLIST
The following parts are included with your TS-200 phone:
• TS-200 telephone
• Plastic base
• AC power adapter
• 6’ RJ11 phone cable
If any of these parts are missing, please contact your reseller.
INSTALLATION
1. Connect the power adapter to a
wall socket and to the phone
base. The power jack is located
on the underside of the phone.
Use only the power adapter
provided with your phone.
2. Connect the telephone line cord from the phone to the wall jack.
3. Plug the coiled cord into the handset, and then plug the other end of the
cord into the phone’s handset connector. The handset connector is on the
left side of the phone.
WALL MOUNTING
1. If you are not using a wall mounting
phone jack plate, remove the bracket
from the phone and use it as a
template to mark the placement of
the screw holes on the wall.
2. Place the bracket on the phone for
wall mounting (rotate 180° from
desk-mount position), and route
cords as shown in the diagram.
3. Push out the handset hook and reattach in opposite direction for the wall
mount position.
4. Replace handset and place the phone on the wall.
• Handset
• Coiled handset cord
• TS-200 User Guide