Filter
Top Products
8 WWW.TALKSWITCH.COM
TS-200 USER GUIDE
THE PHONE DISPLAY
The telephone’s display has three lines of text. The first two lines display information,
while the third shows the functions of the 4 softkey buttons located below the display.
When the phone is idle, it displays the time and
date as well as the number of calls received and
number of new messages in your voicemail inbox.
MAKING A CALL
Calls can be initiated in a number of different ways:
Traditional — Lift the handset and dial the number.
Handsfree or headset — Press the button and dial the number.
Pre-dial — Dial the number first then lift the handset or press . If
required, the phone will automatically add the line access code (for example “9”)
if you dialed an external number.
Call log — Dial from the call log. See the call log section for details on how to
do this.
Directory — Dial from the phone book. See the phone book section for more
details on how to do this.
One-touch speed dial — Press the desired one-touch speed dial key to call a
pre-programmed number.
RECEIVING CALLS
When receiving calls, your phone will ring and the display will show caller identity
information if you are subscribed to Caller ID service.
To answer an incoming call, lift the receiver or
press the button.
You can mute the ringing for the incoming call by
pressing the softkey.
You can enable the ring once feature by pressing the button when
the phone is idle. This will cause all incoming calls to ring the phone only once.
Also, the MUTE button light will now flash when a call is being received. This
light also flashes if you have turned off your ringer.
Ringing volume can be adjusted or turned off by using the volume control buttons
while the phone is idle or ringing.
MUTE
MUTE
SPEAKER
SPEAKER
SPEAKER
09/16 11:03 AM
05 03
CALLS MESSAGES
TalkSwitch
613-725-2980
MUTE