Filter
Top Products
10 WWW.TALKSWITCH.COM
TS-200 USER GUIDE
PARKING A CALL
Parking a call puts the call on hold in one of ten park orbits, and allows the call
to be retrieved from any phone in the office.
1. Press the softkey to park the current call.
2. The system will respond by confirming the call is parked and will announce
the park orbit. The orbit is between 500 and 509.
To retrieve a call that has been parked:
1. From any phone, lift the handset or press the button.
2. Press the softkey followed by the park orbit of the call.
3. You will be connected to call parked in the orbit specified.
PICKING UP A CALL
Pick up allows you to answer a call ringing at someone else’s extension.
When another extension is ringing:
1. Lift the handset or press the button.
2. Press the button.
3. You will be connected to the incoming call.
Note: Pick up works only for incoming external calls.
INTERCOM AND SET PAGING
The TS-200 supports On-hook intercom and Set Paging.
On-hook intercom: On-hook intercom calls are automatically answered in speaker
mode, enabling instant hands-free two-way communication. The telephone at
the target extension must also support intercom.
To place an on-hook intercom call, dial + extension
Set Paging: Set paging calls are similar to on-hook intercom calls, but to a ring
group and are only one-way audio for announcements. All the phones in the ring
group automatically answered in speaker mode to receive the page. The phones
in the ring group must support set paging.
To place a set page call, dial + ring group number
58
*
48
*
PICKUP
SPEAKER
UNPARK
SPEAKER
PARK