Texas Instruments TI-83 PLUS PDAs & Smartphones User Manual


 
Organizer for the TI-83 Plus Page 37
Archive Full
This error appears when the TI-83 Plus does not have sufficient
memory for the application. In order to make room for another
application, you must delete an application and/or archived
variables from the TI-83 Plus. Before deleting an application
from the TI-83 Plus, you can back it up by using the
Link >
Receive Flash Software...
menu in
TI-GRAPH LINK™
for the TI-83
Plus. Once saved, you can reload it to the TI-83 Plus later using
the
Link > Send Flash Software
menu in
TI-GRAPH LINK
.
Communication Error
This error indicates the Flash Installer is unable to communicate
with the TI-83 Plus. The problem is usually associated with the
TI-GRAPH LINK
cable and its connection to the TI-83 Plus and/or
to the computer. Make sure the cable is firmly pushed into the
calculator and the computer.
If this does not correct the problem, try a different
TI-GRAPH LINK
cable and reboot your computer. If you continue
to get this error, please contact TI-CARES™
.