3
INTRODUCTION
The Audiocom® BP-1002 and BP-2002 are
microprocessor controlled one- and two-
channel
intercom belt packs. An internal switch and
jumper setting allows the units to be used with
Clear-Com
®
components, if desired. Other
internal switch and jumper settings allow the
unit to be uniquely configured to the operator’s
requirements.
FCC STATEMENT
This equipment uses, and can radiate radio
frequency energy that may cause interference
to radio communications if not installed in
accordance with this manual. The equipment
has been tested and found to comply with the
limits of a Class A computing device pursuant
to Subpart B, Part 15 of FCC Rules which are
designed to provide reasonable protection
against such interference when operated in a
commercial environment. Operation of this
equipment in a residential area may cause
interference which the user (at his own ex-
pense) will be required to correct.
This product meets the Electromagnetic
Compatibility Directive, 89/336/EEC.
®
Audiocom is a registered trademark of Telex
Communications, Inc., Burnsville, Minnesota 55337
®
Clear-Com is a registered trademark of Clear-Com
Intercom Systems