Filter
Top Products
5
Installation
n
Installation
SELECTING A LOCATION
You can place the phone on a desk top or table, mount it on a standard wall plate, or mount it directly on the
wall. Select a location that is:
²
near an AC outlet not controlled by a wall switch
²
near a telephone line jack
²
out of the way of normal activities
²
away from electrical machinery, electrical appliances, metal walls or filing cabinets, wireless intercoms,
alarms, and room monitors
The base’s location affects the phone’s range. If you have a choice of several locations, try each to see which
provides the best performance.
Caution:
The supplied AC adapter was designed specifically for your SP-515. Use only the supplied adapter.
Notes:
²
Your telephone connects directly to a modular telephone line jack. If your phone line jack is not a modular
jack, you can update the wiring yourself, using jacks and adapters available at your local RadioShack store. Or,
you can let the phone company update the wiring for you.
²
The USOC number of the jack to be installed is RJ11C (RJ11W for a wall plate).
PLACING THE BASE ON A DESK TOP
Follow these steps when you place the base on a desk, shelf, or table.
1
Plug one end of the supplied long modular cord into the
TEL LINE
jack on the back of the base.
2
Insert the supplied AC adapter’s barrel plug into the
POWER
jack on the back of the base.
3
Plug the modular cord’s other end into a modular phone line jack.
4
Plug the adapter into a standard AC outlet.
5
Raise the base’s antenna to a vertical position.
TEL LINE Jack
POWER Jack
Antenna