Filter
Top Products
10
Preparation
CHANGING THE REMOTE ACCESS CODE
The remote access feature allows you to access the answering system from a touch-tone phone. The remote
access code is preset to 500, but you can change it to any three-digit number from 500 to 999.
To change the remote access code, press
CHANGE
then repeatedly press
SET UP
until you hear “Remote ac-
cess code is …” and follow the voice prompt instructions. Press
STOP
when you are done.
SETTING THE HANDSET’S RINGER
You can turn off the handset’s ringer by setting
RINGER
on the side of the
handset to
OFF
. Turn it back on by setting
RINGER
to
ON
.