Sony PEG-NR70V/U PDAs & Smartphones User Manual


 
82
1
In the photo list screen, tap (Import/Export).
The check boxes used for selecting the image files appear.
2
Tap the check boxes to select the image files you want
to save.
3
Tap Import.
The Import/Export dialog box appears.
4
Tap OK.
The selected image files are saved to the CLIÉ handheld. Depending
on the image file, this may take a few seconds.
Beaming image files
You can beam PGP-format image files stored on your CLIÉ handheld
or the inserted Memory Stick media to another Palm OS PDA. (You
cannot beam DCF-format image files.)
Notes
If Beam Receive in the Preferences menu is set to Off, you cannot receive data
using the beaming feature. Before beaming data, make sure to set Beam
Receive to On.
You can only beam one image file at a time.
Do not beam a 16-bit image file to a CLIÉ handheld with PictureGear Pocket
Ver.1.x installed, as it is not compatible with 16-bit image files. If you do, the
screen of the receiving handheld goes blank; in such cases, tap the screen to
recover to the state before beaming.
1
Display the image file that you want to beam (page 74
or 78).
2
Follow the steps in Beaming Information in the
Operating Instructions manual.
Copying image files