Filter
Top Products
65
Using your CLIÉ™ handheld with your computer
Using your CLIÉ™
handheld with
your computer
Follow the procedure below prior to using your CLIÉ handheld with your
computer.
Step 1: Install the software on your
computer
The “Palm™ Desktop for CLIÉ” software stored on the supplied CD-ROM
must be installed on your computer. The software is used for data transfer
between your CLIÉ handheld and computer, and handling data such as Address
Book on your computer.
b
For details on the system required on a computer, refer to “System required on a
computer” on page 111.
Notes
• Do not simply copy the “Palm™ Desktop for CLIÉ” folder from the supplied CD-
ROM to your computer. To install the software properly, follow the installation
procedure described in this manual.
• If you use Windows 2000 Professional or Windows XP operating system, log on with
a User Name in the Administrators group before installing the software.
1
Install the software on your computer
2
Connect the cradle to your computer
3
Enter a user name for your CLIÉ handheld
Do not connect the supplied cradle to your computer
before installing the software. The software may not
be installed properly.
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •