Sony PEG-NZ90 PDAs & Smartphones User Manual


 
20
Removing the battery
Slide the battery release knob as directed by the arrow and remove the battery.
Tip
About the built-in rechargeable button battery
Your CLIÉ handheld uses the built-in rechargeable button battery to maintain data stored
in the built-in memory while replacing the Battery Pack.
The rechargeable button battery is automatically charged while you use your CLIÉ
handheld. However, the rechargeable button battery will be completely discharged in
approximately twelve hours if the power is not supplied from the Battery Pack. Make
sure you recharge the button battery before it gets completely discharged.
How to charge the rechargeable button battery
Place your CLIÉ handheld in the cradle while the Battery Pack is inserted.
Turn off your CLIÉ handheld for 24 hours or more while the charged Battery Pack is
inserted.
3
Close the battery cover.
Verify that the battery is
completely inserted into the
slot and close the battery cover.