Filter
Top Products
12 • Installation
[ SNOM 320 MANUAL V1.00 ]
Fig. 5 Fig. 6
(6) The slots on the footstand for the various cords can also be
used when the phone is mounted on a wall. After connecting the phone
(see chapter Setting up the Phone, above), form the cords into loops and
gently press the long ends into the slots on the footstand (Fig. 6). If the
loops are too big they will hamper the secure mounting of the phone on
the wall; if they are too small they might bend or break the cords.
The delivery includes a template to be used for marking the
position of the holes to be drilled in the wall.
(Use wall plugs, if necessary, and screws with half-round head
profi les (diameters of screws dmax= 4.5 mm (0.1755”), diameters of
heads dmax=8.5 mm (0.3315”).
The screws must protrude approx. 0.5 cm (0.195”) from the wall
for easy wall mounting of the phone.
Adjusting the Handset Rest
The speaker of the handset has a small, rectangular indentation
that fi ts over the rounded end of the plastic tab inserted into a slot on
the top shell of the phone. When the phone is mounted on the wall, the
1