Filter
Top Products
Device Quickstart Guide
© Phoneserve. All Rights Reserved Worldwide. info@phoneserve.com
5
5. Interface Configuration
Your browser should now show a tabbed user-interface page. The pages
are labelled;
Info, System, SIP, Provisioning, Regional, Line 1, PSTN
Line, User 1
and
PSTN User.
If you do not see all these tabs you are not in the “
advanced admin”
mode. To get there click on “
Admin Logon
” then “
Advanced
” at the top
right of the web page.
These tabbed pages allow complete and detailed customisation of almost
every element of the device, but for simple use as a Phoneserve gateway
only a very few changes are necessary;
(The Info page displays current set up. There are no configuration changes
possible on this page.)
On the
System page
; network connectivity options may be set, but
because you are viewing that page you have obviously already managed
those parameters via the IVR Interface.
On the
SIP, Provisioning, Regional, User 1 and PSTN User pages
; the
device defaults should suffice for basic operations.
The Line 1 settings that may require changing from default are these:
Line Enable:
Yes
Nat Settings:
NAT Keep Alive Enable:
Yes
Sip Settings:
Sip Port: 5060
Proxy and Registration:
Proxy: adp1.winnerip.com
Register: Yes
Use OB proxy in Dialog: No
Subscriber Information:
Display name: Your name
User ID: Phoneserve Account Number (18 digits)
Password: left in blank
Audio Configuration:
Preferred Codec: G723
Use Pref Codec Only: No