Filter
Top Products
Device Quickstart Guide
© Phoneserve. All Rights Reserved Worldwide. info@phoneserve.com
2
This device is a FXS and FXO telephone adapter, enabling low cost Internet
calls from standard telephone apparatus.
1. Before you begin
Verify that you have the following:
SPA3000
(software version 2.0.9(GWi)) and Power Supply
SPA3000
Cabling
PC (Initially for configuration of the SPA3000 A PC is used for
monitoring and reporting of the Gateway status, but this does not
have to be local to the SPA3000)
A network connection to the Internet
An
analogue phone with an RJ11
connector
Phoneserve literature including:
-
Phoneserve Omni Quick Install Guide
(this document)
- Phoneserve Omni Account Details
(available from your
account manager)
- Phoneserve Omni user instructions (available from your
account manager)
2. Cabling the SPA3000
Connect a standard telephone to
Phone-1
port of the SPA3000.
The
telephone should be a modern tone-dialling (DTMF) type.
Connect the standard RJ45 Ethernet cable (supplied) to the LAN port. The
other end of this cable should be connected to your Network feed (Router,
Hub, Switch or similar).
Finally, Insert the power adapter cable into the 5V power socket of the SPA
and power up the device by plugging the power adapter into a live power
outlet.