Filter
Top Products
19
Using the EZX 60
If you are out of the transmission range
Calling is only possible in the Bluetooth transmission range of the mobile
phone or Bluetooth device, respectively. The transmission range largely
depends on environmental conditions such as wall thickness, wall compo-
sition etc. With a free line of sight, the transmission range of most mobile
phones or Bluetooth devices is up to 10 meters.
If the headset leaves the transmission range of the mobile phone or
Bluetooth device:
• The sound quality deteriorates before the connection finally breaks
down.
• Your mobile phone or Bluetooth device displays the loss of connection.
• Please refer to the manual of your mobile phone or Bluetooth device for
information on whether the call is automatically transferred to the
mobile phone or Bluetooth device or requires an acknowledgement to
do so.
The headset will then go into standby mode.
Restoring factory default settings
You can restore the following settings to their factory default settings:
•speaker volume
• ring tone volume
•pairing
̈ Set the headset to pairing mode as described under “Establishing Blue-
tooth connections” on page 11.
̈ Press the volume up button º and the volume down button ¶ three
times in quick succession (i.e. press º then ¶ then º then ¶ then º
then ¶).
The LED ¿ flashes 4 times, indicating that the reset was successful and
the headset then switches off.
¿ᕧº