Filter
Top Products
17
Using the EZX 60
Transferring an active call
from the headset
to the mobile phone*
̈ Double-press the multi-function button ³.
A low confirmation beep is heard in the headset. The call audio is trans-
ferred to the mobile phone. The headset returns to standby mode.
* This function must be supported by the mobile phone.
Muting/unmuting the headset’s microphone
To mute the headset’s microphone during a call:
̈ Press and hold the multi-function button ³ for 1 to 2 seconds.
Two low mute indication beeps are heard in the headset every
4 seconds while the microphone is muted.
To unmute the headset’s microphone:
̈ Press and hold the multi-function button ³ for 1 to 2 seconds.
A sequence of low confirmation beeps is heard in the headset. The
microphone works as usual.
ᕡ
¿
2 x
ᕡ
¿
2 s