Filter
Top Products
Putting the EZX 60 into operation
10
Putting the EZX 60 into operation
Charging the headset battery
If you charge the battery for the first time, allow charging for at least
2.5 hours without interruption. Later, 2 hours will suffice to fully charge
the battery. The headset cannot be used during the charging process.
To charge the battery in the headset:
̈ Take off the headset and switch it off (see page 12).
̈ Connect the charging plug µ to the socket for power supply ·
If you use the optional charging accessories (see “Accessories“ on
page 21)*:
̈ Connect the USB charging cable to the socket for power supply ·.
̈ Connect the USB plug of the USB charging cable to:
– a USB socket of a computer
– or the USB socket of the USB car charger adapter
̈ Connect the USB car charger adapter to the appropriate power outlet.
During charging, the LED ¿ lights up blue. All active connections will be
interrupted. When charging is complete, the LED ¿ flashes once every
2seconds.
A fully charged battery provides a talk time of up to 7.5 hours or a standby
time of up to 300 hours.
WARNING Danger of injury!
Wearing the headset when charging can cause burns and
injuries.
̈ Do not wear the headset when charging.
EU
UK
US
AU
*
2h
ᕢ
ᕤ
µ
¾