Filter
Top Products
17
Putting the headset system into operation
Swapping the assignment of the AUDIO button ቦ
The assignment of the AUDIO button ቦ can be swapped depending on
whether you wear the headset on the right or left ear. By default, the
headset is configured for wearing on the right ear. Pushing the AUDIO
button
ቦ upwards increases the volume, pushing it downwards reduces
the volume (see page 28).
To swap the assignment of the AUDIO button ቦ:
̈ Simultaneously press and hold the headset’s LINK button ብ and
AUDIO button ቦ for 5 seconds.
The HEADSET LED ቤ flashes blue/red.
̈ Push the AUDIO button ቦ in the direction in which you want to
increase the volume until the HEADSET LED ቤ goes off.
The headset switches to standby mode.
Testing the headset system in Phone mode and
adjusting it
Testing the telephone connection
When PC mode is selected (the LED of the PC button ³ lights up white):
̈ Press the PHONE button » on the base station.
The base station is set to Phone mode and the LED of the PHONE button
» lights up white.
̈ Press either the LINK button ብ on the headset or the PHONE
button » on the base station.
A wireless link is established between the headset and the base
station, the LINK
LED ¿ lights up blue and the HEADSET LED ቤ flashes
blue.
5 s
Left
Right
5
4
3
»
4
¿
3