Filter
Top Products
17
Register to Base
In multi-handset mode, you may need to switch the base to which a
handset is assigned. Up to four assignments are possible. You can set
based selection manually or automatically.
Register an optional handset
1. Press and hold down the button on the base for 5 seconds or
until the base begin to give out a confirmation tone.
2. Go into the
“HS setting” menu of the handset and press the
or keys until the “Register to BS” is selected. Press the OK key
(Soft Key 1 ) and select the base number (from 1 to 4) where
the handset should be registered by using the or keys.
3. Press the
OK key (Soft Key 1 ). The handset now searches for
the base. When it finds the signal, the Base Identification Code
is displayed.
4. Press the
OK key (Soft Key 1 ) and insert the PIN code (default
1590). Press the OK key (Soft Key 1 ) to confirm.
Register a handset on a secondary base
The procedure is the same as previously shown in “
Register an
optional handset”. At the end of this procedure, the base will
assign the number to the handset automatically.
If the base where you want to register a handset is a different model,
When registering an
optional handset or
registering a handset
on a secondary base,
you must know the
PIN code of the base
where the handset
will be registered.
NOTE!
Getting Started