Filter
Top Products
16
Flash
While on a call, you may want to transfer the call to someone else
connected to the same PABX. This can be done by using the flash
function.
• Press the
Flash key (Soft Key 2 ) or press and hold the # key for
2 seconds during an external call.
The base station will then transmit a FLASH signal to the line.
Inter-digit pause
Some phone numbers require you to dial additional digits a few
seconds after entering the phone number. You can insert a 3-second
pause while in pre-dialing mode.
1. Enter the first set of numbers.
2. Press the
key and a “-” will be inserted. Alternatively, you can press
the Options key (Soft Key 1 ) and choose the item “Insert Pause”.
3. Enter the number you want to dial, and press the
key to start a call.
Getting Started