12
Volume setting for base
You also can set the volume for the melody.
1. Go to
“Base Settings” menu. Press the OK key (Soft Key 1 ).
2. Choose
“Base Ring Tone”. Press the OK key (Soft Key 1 ).
3. Choose
“Volume”. Press the OK key (Soft Key 1 ). The display
will show the previously stored volume level.
4. Choose from volumes 1 through 9. Press the
OK key (Soft Key 1 )
to confirm.
Melody setting for base
You can choose from 9 different ring melodies.
1. Go to the
“Base Settings” menu. Press the OK key (Soft Key 1 ).
2. Choose
“Base Ring Tone”. Press the OK key (Soft Key 1 ).
3. Choose
“Melody”. Press the OK key (Soft Key 1 ).
4. Choose from
melodies 1 through 9. Press the OK key (Soft Key 1
) to confirm.
Getting Started