Sanyo CLT-A5822 Cordless Telephone User Manual


 
12
Making a call
1. Press TALK.
Note: If handset is in the base cradle, remove it from base before pressing
the TALK key.
2. Dial the phone number.
3. Press TALK to end your call.
Volume adjustment
The VOLUME key adjusts the volume level of the earpiece. There are 4 volume
levels.
1. Make sure the phone is in TALK mode.
2. Press the CID/VOL
or key on the handset.
Transferring a call (For CLT-A5822 and CLT-A5832)
The current conversation can be transferred to another handset. Only one
handset can talk with an outside caller at a time. The second handset cannot
listen to the conversation or make an outgoing call while the other handset is in
use.
1. During a call, press and hold the MUTE/FORMAT key, until “TRANSFERRING
shows on the screen and both handsets beep.
Note: To cancel the transfer and return to the caller, press TALK key on the
handset.
2. Press TALK on the other handset to get the call.
Note: During call transfer, if there is no further action within 2 minutes on both
handsets, the call will end.
Ringer switch
The RINGER switch must be on for the handset to ring during incoming calls.
Telephone Number
BASICS
Channel No.
Call Timer
Volume Level
sy5822 10 april.p65 2006/5/12, ¤U¤È 02:5212