Filter
Top Products
1
Press and hold
MEMORY
until the display shows the
Memory Store
screen and any stored name/number.
A beep sounds.
2
Press
and
,
or enter a two-digit number (01– 20)
to select the memory location you want to edit.
3
Press
INTERCOM/SELECT
.
The following screen appears with the memory location
number that you have selected in the display.
E25
4
Press to move the cursor down to the
Delete Memory
command line.
5
Press
INTERCOM/SELECT
. The following
confirmation screen appears.
6
Press to move the cursor to
Yes
.
7
Press
INTERCOM/SELECT
or
DELETE/SCAN
.
There is a confirmation tone and the entry is
deleted. The following screen appears.
8
After a few seconds the display returns to the
Memory Store
screen.
You may select another number to delete (return
to step 4) or press
MEMORY
to return to standby.
Memory02 Deleted
Memory Store
01 SANYO
02 Alison McNab
Memory Store
01 SANYO
02 Alison McNab
Edit Memory02
Delete Memory02
Go Back
Edit Memory02
Delete Memory02
Go Back
Delete Memory02?
Yes
No
DELETE/SCAN
Memory Store
01 SANYO
02
DIRECTORY/
SPEED-DIAL
Erasing a stored name and phone number
CLT2430 5th 8/9 8/10/00 4:29 PM Page 29