Filter
Top Products
E9
Charge the battery pack for a full 15 hours before you start using your phone.
1
Press on the battery cover and slide the cover
down until it comes off.
2
Plug in the battery pack connector with the
correct polarity (black and red wires), then insert
the battery pack into the battery compartment.
3
Slide the battery cover on until it snaps into
place.
4
Place the handset on the base.
5
Make sure that the
CHARGE/IN USE
indicator lights. If the indicator does not light,
check to see that the AC adaptor is plugged in
and that the handset makes good contact with
the base charging contacts.
CHARGE/IN USE
Use only the battery pack supplied or the specified
Sanyo types with your phone.
Type: SANYO 3KR-600AAL or SANYO/GE GES-PCF01
Note:
Preparing the battery pack
GETTING
STARTED
CLT2430 5th 8/9 8/10/00 4:28 PM Page 13