Filter
Top Products
E10
Battery use time (per charge)
With a fully charged battery:
• Six hours continuous use.
• Seven days when the handset is in the standby mode.
When the battery charge level
becomes low
When the voltage of the battery pack in the handset is
very low and needs to be charged, the phone is
programmed to stop functioning in order to save power.
If the phone is not in use,
Low Battery
flashes and none of the keys will operate. If
the phone is in use,
Low Battery
flashes and the handset beeps. Complete your
conversation as quickly as possible and return the handset to the base unit for charging.
Cleaning the battery contacts
To maintain a good charge, it is important to clean the battery contacts with a dry cloth
on the handset and base unit about once a month.
Do not use any liquids or solvents.
Low Battery
GETTING
STARTED
Note:
Repeated short chargings may cause memory effect
in the battery pack, which reduces use time of the
battery. It is recommended not to replace the
handset to the base unit after each call.
CLT2430 5th 8/9 8/10/00 4:29 PM Page 14