Filter
Top Products
E7
Standard wall plate mounting
This phone can be mounted on any standard telephone wall plate.
1
Attach the bottom bracket to the base as
shown. Make sure all tabs snap into the
notches on the base.
2
Plug the telephone line cord to the
TEL LINE
jack and the small plug of
AC adaptor to the
DC IN 9V
jack.
3
Plug the telephone line cord into the
telephone outlet.
4
Fit the AC adaptor cord into the molded
groove. Then wrap the cord around the
strain relief notch.
5
Plug the AC adaptor into a standard
120-V AC wall outlet.
6
Raise the antenna to a vertical position.
7
Align the mounting slots on the base with the
mounting posts on the wall. Push in and
down until the phone is firmly seated.
1
2 - 7
Mounting the base unit on a wall
GETTING
STARTED
CLT2430 5th 8/9 8/10/00 4:28 PM Page 11