Troubleshooting
The phone does not boot.
-Check if your phone is correctly connected.
-Checkifthe adapter is correctly installed. Refer to page 9.
-Unplug the adapter, and then replug the adapter after for more 10
seconds.
The phone does not work
after booting.
-Check if your phone sIPaddress is duplicated with other unit.
The Network information inquires to administrator.
-Check if your phone is correctly installed. Refer to page 9.
No sound dial ready tone.
-Check if the phone is correctly installed. Refer to page 9.
-Check if the phone
snetwork ssetting is correctly set.
No display on the screen.
-Check if the phone is correctly installed. Refer to page 9.
No sound ring tone.
-PresstheVolume + to increase the ringer volume.
Refer to page 27.
I hear many noises during a
call.
-Liftthe handset to change to handset mode during a call.
I hear many noises while
using speakerphone.
-Your IP Phone is too near from another phone.
-Relocate the your IP phone at 1 m cover from another phone.
Symptoms Remedies
Let’s think about the problems that can occur when using the IP Phone.
If there is any problem of IP Phone, check the below items first. If the problem is not solved with following
methods, please contact the service center.
Registration
In idle mode, press the Transfer
button
press the desired
Function Key.
Enter the Index number press the Enter
[OK] button.
Or, enter the “001” select the desired function
by using or buttons press the same
Function Key.
Previous Next
Prees the Function Key
Service
Transfer
Enter the related Phone Number or
select the Value press the same
Function Key.
(For example : If you select the Auto send
function, enter the phone number for auto
sending
press the same Function Key)
-Upto10buttons can be programmed by repeating the
upper 1 ~ 3 steps.
Code
003
Auto Send
Service
3301
Service
In idle mode or lit and hold the handset, press the
assigned Function Key.
(For example : If you press the Function1 key, send to
“3301” automatically)
3301
Service
Function Keys usage
Appendix