Filter
Top Products
Settings 3CallForward
You can set set or cancel a call transfer method.
The user can enable call forwarding for all calls, during busy times, or in the event of no answer.
In idle mode, press the Set. soft button.
Select the 2 Settings 3 Call Forward
Press the Enter[OK]button.
Back
1 Phone
2 Settings
Select the Type of Call Forward Press the
Enter[OK]button.
Back
Disable
Forward All
Forward Busy
Forward No Answer
Enter the Forward Number Press the
Enter[OK]button
BackDel.Save
[Forward Number]
9876
Basic Menus
Back
1 Application Set.
2 Absent Messages
3 Call Forward
4 Network Info.
Settings 4Network Info.
Shows IP, MAC information and LAN connection status.
In idle mode, press the Set soft button.
Select the 2 Settings
4 Network Info.
Press the Enter[OK] button.
Back
1 Phone
2 Settings
Enter the Password Press the Enter[OK]
button.
The default password is “1234”.
You can show the Network Mode, IP, Subnet
Mask, Gateway, DNS1 and DNS information.
Back
1 Application Set.
2 Absent Messages
3 Call Forward
4 Network Info.
Back
Delete
[Network Info]
Enter Passward.
****
Back
Mode:Static IP
IP: 23.30.156.121
SUBNETMASK:
[Network Info.]
Settings 5UserDataInit.
Initializes the phone by entering a password.
In idle mode, press the Set. soft button.
Select the Phone Setting 5User Data Init.
Press the Enter[OK]button.
Enter the Password Press the Enter[OK] button.
The default password is “1234”.
Wait for a minute.
[Reboot Phone]
Back
1 Phone
2 Settings
Back
2 Absent Messages
3 Call Forward
4 Network Info.
5 User Data Init.