Filter
Top Products
25
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press TRSF and then dial 715 PGM.MESSAGE (01)
Display shows the first message GIVE ME THE CALL
2. Dial in the message number (e.g., 11) PGM.MESSAGE (16)
OR press UP or DOWN to scroll through EMPTY MESSAGE
the messages and press the right soft
key to move the cursor
3. Enter in the message using the PGM.MESSAGE (16)
procedure in P
rogram Station Names IN THE SHOWROOM
and press the right soft key to return
to step 2 above
4. Press TRSF to store and exit programming
OR press SPK to store and advance to
the next program
SET ALARM/APPOINTMENT
REMINDER WITH MESSAGE
Keyset users can set their own alarms but standard telephone users cannot.The
system administrator can set alarm/appointment reminders for other stations in
the system.
PROGRAM KEYS
UP & DOWN - Scroll through extensions.
HOLD - Press to clear data.
KEYPAD - Used to enter data.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press TRSF and then dial 116 [201
]ALM REM(1)
Display shows HHMM: NOTSET
System_Administration_Guide.qxp 4/30/2007 12:56 PM Page 32