Filter
Top Products
40
41
Line
The most frequent use for the line keys is assigning them one of two possible
user accounts for call management.
To assign the key as a Line via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Speed Dial
You can congure the key as a simplied speed dial key. This key function allows
you to easily access the most frequently dialed numbers.
To assign the key as a Speed Dial via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Conference
You can congure the Line key to be used as a conference key while remaining in
the current call. This key allows a user on a call to conference another party while
remaining in the conference.
‘To assign the key as Conference via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Forward
Two use cases can be considered for this function. If a key is congured as
Forward key:
• When you press this key during an incoming call, you will be able
to divert this call directly. Depending on your conguration you will
be prompted to enter target number, or stored value will be used.
This function can be used, for example, to divert certain calls to
your voicemail
• When you press it in idle status the IP phone will enter the forward
interface. In this case you will be able to enable CF and set the
phone number to which calls must be forwarded if it had not been
set previously. Forward type will be the latest used. By pressing the
key again CF will be disabled.
To assign the key as Forward via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)