Filter
Top Products
36
3737
Firmware Update and Autoprovisioning
The phone is delivered with pre-installed rmware. To update the phone’s rm-
ware, please contact your system administrator. You can only update the rmware
via Web interface.
To update the rmware manually via Web interface:
Choose SYSTEM[UPGRADE; select the rmware le in your local computer.
Click UPGRADE button to update the new rmware.
Please do not power o during updates.
To update the rmware and conguration automatically, you can use auto provi-
sioning.
Note: Please check with your network administrator for the Autoprovisioning guide.
To launch Autoprovisioning using web interface:
Go to SYSTEM[PROVISIONING Settings
Set Auto Provision via phone interface:
1) Go to MENU/BACK[3. SETTINGS[2. ADVANCED
2) You are prompted to enter password
3) Scroll to 7. Auto Provision and press OK button.
Enter the URL, User Name and Password (optional).
Click OK key to save the changes and reboot the phone.
Note: Any power interruption during the subsequent process will most likely lead to
a ash memory error. As a result the system may not initiate. The procedure
can be only conducted in Administrator Mode. The upgrade priority is rst the DHCP
option eld, then the precongured URL eld.
Decryption
Your IP110 supports conguration le encryption for provisioning. In case encryp-
tion is used, AES key needs to be congured on the phone.
Set AES key via Web interface:
Go to SYSTEM[PROVISIONING Settings
Note: You can ask your system administrator for the decrypt password.