Radio Shack Two-Line Caller ID Phone With Speakerphone Cordless Telephone User Manual


 
9
SELECTING A LOCATION
You can place the phone on a desk top
or table, or mount it on a standard wall
plate. Select a location that is:
near an accessible AC outlet
near a telephone line jack
out of the way of normal activities
away from electrical machinery,
electrical appliances, metal walls or
filing cabinets, wireless intercoms,
alarms, and room monitors
Note:
The base’s location affects the
phone’s range. If you have a choice of
several locations, try each to see which
provides the best performance.
MOUNTING THE SYSTEM
Attaching the Stand
To mount the phone on a wall or desk
top, you need to attach the supplied
stand to the phone.
To place the phone on a desk top
, insert
the tab on the narrow end of the stand
into the upper center slot. Then snap the
two spring tabs on the wide end of the
stand into place.
To mount the phone on a wall plate or
directly on the wall
, insert the tab on the
narrow end of the stand into the lower
center slot. Then snap the two spring
tabs on the wide end of the stand into
place.
To remove the stand from the phone
,
while pressing and holding in both
spring tabs, gently pull up the wide end
of the stand and lift it off.
Spring
Tabs
Narrow
End
Upper
Center Slot
Phone’s
Upper Half
Stand
Phone’s
Lower Half
Stand
43-935.fm Page 9 Friday, January 14, 2000 3:07 PM