Filter
Top Products
13
3. When you hear the dial tone, press
any number other than
0
.
Note:
If your phone system requires
that you dial an access code (9, for
example) before you dial an outside
number, do not press the access
code number.
•
If the dial tone stops
, you have
touch-tone service. Leave
TONE
/
PULSE
set to
TONE
.
•
If the dial tone continues
, you
have pulse service. Set
TONE
/
PULSE
to
PULSE
.
INITIALIZING THE
SYSTEM
Before you use the phone the first time
or any time you need to reset the
phone’s clock, use a pointed object,
such as a straightened paper clip, to
press
RESET
. 12:00 AM appears on the
display.
Notes:
• The telephone company sends the
correct time with each incoming call,
so the correct date and time are au-
tomatically set when the phone re-
ceives its first call.
• If the system does not work after
you initialize it, remove the batteries,
disconnect the system from the
phone line and the AC outlet, re-
place the batteries with fresh ones,
then reconnect it and try initializing it
again.
43-935.fm Page 13 Friday, January 14, 2000 3:07 PM