Filter
Top Products
15
To switch from the speakerphone to the
handset
, simply pick up the handset.
New Call Indicator
The NEW CALL indicator blinks if the
system has either voice mail or a new
call in call memory. The NEW CALL in-
dicator stops blinking if you have re-
viewed all the voice mail messages and
new calls.
USING MUTE
During a call, press
MUTE
to talk to
someone else in the room without the
person on the other end of the line hear-
ing your conversation.
PRIVACY
appears
on the display.
Press
MUTE
again to resume your
phone conversation.
USING FLASH
FLASH
performs the electronic equiva-
lent of a switchhook operation for spe-
cial services, such as Call Waiting.
For example, if you have Call Waiting,
press
FLASH
to answer an incoming call
without disconnecting the current call. F
appears on the display to the right of the
displayed numbers. Press
FLASH
again
to return to the first call.
Notes:
• If you do not have any special
phone services, pressing
FLASH
might disconnect the current call.
•Pressing
FLASH
does not hang up
the system.
• You can store a
FLASH
entry when
you store a number in memory.
USING REDIAL
Note:
The redial memory holds up to 24
digits, so you can redial long distance as
well as local phone numbers.
To quickly redial the last number dialed,
press
SPEAKERPHONE
or pick up the
handset, press
LINE 1
or
LINE 2
to select
a line, then press
REDIAL
when you
hear a dial tone. The number scrolls
across the display, and the phone dials
it.
USING HOLD
To place a call on hold, press
HOLD
.
The line’s indicator flashes slowly.
Note:
Press the other line button without
pressing
HOLD
to disconnect the current
call on hold.
To release a call from hold, press that
line’s button and begin speaking again.
You can also release a call from hold by
picking up any extension phone on that
line.
43-935.fm Page 15 Friday, January 14, 2000 3:07 PM