Filter
Top Products
14
TELEPHONE OPERATION
MAKING AND RECEIVING
A CALL
To make a call, lift the handset and press
TALK
. When you hear the dial tone, dial
the desired phone number or memory
number (see “Memory Dialing” on
Page 16).
To answer a call if the handset is on the
base, lift the handset and begin your
conversation. If the handset is away
from the base, press
any key on the
handset before speaking. The TALK in-
dicator on the handset and the IN USE
indicator on the base flashes.
To end a call, press
TALK
on the handset
or place the handset on the base. The
TALK and the IN USE indicators turn off.
Note:
If you press
TALK
to hang up and
the phone does not disconnect, place
the handset on the base.
SETTING THE HANDSET’S
VOLUME
You can change the handset’s volume
during a call by repeatedly pressing
VOLUME
or
.
The volume steps up
and down the four settings and remains
set for subsequent calls.
Note:
The TAD-733 beeps three times
when it reaches the highest or lowest
volume setting.
USING REDIAL
You can quickly redial the last number di-
aled. Lift the handset and press
TALK
.
When you hear the dial tone, press
REDI-
AL.
Notes:
• The TAD’s redial memory stores
up to 32 digits, so you can redial
long-distance as well as local
numbers.
• The redial memory stores pause en-
tries (see “Entering a Pause” on
Page 17).
• The redial memory does not store a
flash entry or any digits entered af-
ter you press
FLASH
(see “Using
Flash” on Page 15).
TALK Indicator
43-733.fm Page 14 Friday, September 17, 1999 8:57 AM