Filter
Top Products
13
Repeatedly press
VOLUME
until you hear
the desired ringer setting. Each time you
press
VOLUME
, the ringer changes in
this order:
SETTING THE NUMBER
OF RINGS
Set
RING
TIME
on the side of the base to
3
,
5
, or
T/S
to select how long the TAD
waits to answer a call (3 rings, 5 rings,
or toll-saver).
Note:
If you plan to check messages by
long distance, set
RING
TIME
to toll-sav-
er (see “Using the Toll-Saver” on
Page 25).
SETTING THE DAY/TIME
You must set the day of the week and
time so the TAD can record the correct
day and time of each message.
Note:
Enter each key press within about
2 minutes. Otherwise, the TAD exits the
time setting process and you must begin
again with Step 1.
1. Hold down
CLOCK
until the TAD
beeps. The TAD announces the cur-
rently set day and displays the day’s
number (
0 for Sunday, 1 for Mon-
day, and so on).
2. To change the day of the week, re-
peatedly press
SKIP
to move for-
ward or
REPEAT
to move backward.
To set the correct day of the week
when it displays, press
CLOCK
.
3. The TAD announces the hour. To
change the hour, repeatedly press
SKIP
or
REPEAT
. To set the correct
hour when it displays, press
CLOCK
.
4. The TAD announces the minutes. To
change the minutes, repeatedly
press
SKIP
or
REPEAT
. To set the
correct minutes when they display,
press
CLOCK
.
5. The TAD announces “AM” or “PM,”
and
A or P appears. Press
SKIP
or
REPEAT
to change this setting.
Press
CLOCK
again to set “AM” or
“PM.”
High-volume, high-pitch
Low-volume, high-pitch
High-volume, low-pitch
Low-volume, low-pitch
CLOCK
SKIP
REPEAT
43-725.fm Page 13 Tuesday, February 23, 1999 2:47 PM