Filter
Top Products
8
2. Plug the other end of the AC
adapter into a standard AC outlet.
The TAD-1006 initializes, the L.
BATT (low battery) indicator lights
steadily, and the ANSWER,
MEMO, and PLAY indicators flash
six times. Then the TAD-1006
beeps once and the ANSWER
indicator lights steadily.
Notes:
• Be sure not to press any of the
TAD-1006’s buttons while you are
plugging the adapter into the AC
outlet. If you accidentally press a
button, unplug the adapter from
the AC outlet, then plug it back in.
• The answering system on your
TAD-1006 cannot operate without
AC power. However, you can
make and answer calls on the
telephone without AC power.
INSTALLING A BACKUP
BATTERY
If AC power fails or you unplug the
TAD-1006, a 9V backup battery (not
supplied) saves the messages and the
settings for the day, time, and security
code. We recommend you use an al-
kaline battery, such as Radio Shack
Cat. No. 23-553.
1. To open the battery compartment
cover on the bottom of the TAD-
1006, loosen the screw in the
cover with a small Phillips screw-
driver, then lift off the cover.
2. Snap the battery’s contacts firmly
to the battery connector, then put
the battery into the compartment.
3. Replace the cover, then tighten
the screw.
illustration
illustration
illustration
43-768.fm Page 8 Friday, August 13, 1999 2:49 PM