Filter
Top Products
8
PREPARATION
Complete the procedures in this sec-
tion before you set the TAD to answer
calls.
Note:
The keypad is located under the
cover on the front of the TAD. Lift the
cover to access the keys.
SETTING THE DAY
AND TIME
Follow these steps to set the current
day and time so the TAD will record the
day and time each memo and phone
message is recorded.
1. When
CL
flashes on the display,
press
PGM/DEL
. The answer indi-
cator flashes.
2. Press
TIME
. The TAD says “Enter
one for Monday. Enter two for
Tuesday. Enter three for Wednes-
day. Enter four for Thursday. Enter
five for Friday. Enter six for Satur-
day. Enter seven for Sunday.”
3. Press a number button to set the
day of the week. The TAD says
the day of the week and “Enter the
time.”
4. Press two digits for the hour. The
TAD says the hour.
Note:
If you make an invalid entry
(for example,
00
or
13
), the TAD
beeps three times and repeats
“Enter the time.”
5. Press two digits for the minute.
The TAD says the minute and
“Enter one for AM, two for PM.”
Note:
If you make an invalid entry
(for example,
66
), the TAD beeps
three times. The TAD does not
repeat the audio prompt. Make a
correct entry.
6. Press
1
or
2
. The TAD says the
current day and time.
Notes:
• If you make an incorrect entry, the
TAD beeps three times. Make a
correct entry.
• If you do not press any keys to set
the date and time, the TAD contin-
ues through the voice prompt
sequence with time delays for
your responses and says “Mon-
day, 2:04 AM.”
To hear the current day of the week
and time at any time, press
PGM/DEL
,
then
9
.
43-745.fm Page 8 Friday, August 13, 1999 2:16 PM