Filter
Top Products
9
4. Insert the supplied AC adapter’s
barrel plug into the
DC IN 9V
jack
on the back of the base.
5. Route the adapter’s cord through
the right side of the strain relief
slot on top of the base and
through both the upper and lower
grooves on the bottom of the
base.
6. Align the keyhole slots with the
mounting screws and slide the
base downward to secure it.
Strain Relief
Slot
Upper
Groove
Lower
Groove
7. Plug the modular cord into a mod-
ular phone line jack.
8. Press and lift out the handset
holder, rotate it 180°, then snap it
back into place so it holds the
handset.
9. Plug the adapter into a standard
AC outlet. The POWER indicator
on the base lights.
10. Lift the base’s antenna to a verti-
cal position.
43-1095.fm Page 9 Tuesday, August 17, 1999 3:37 PM