Filter
Top Products
12
SETTING THE RINGER
On the Handset
The ringer on the handset is turned on
whenever the handset is off the base.
You can select one of four different
ringer tone/volume settings on the
handset while the phone is not in use.
Press
VOLUME
to hear the current
ringer setting.
Repeatedly press
VOLUME
until you
hear the desired ringer setting. Each
time you press
VOLUME
, the ringer
changes in this order:
High-volume, high-pitch
Low-volume, high-pitch
High-volume, low-pitch
Low-volume, low-pitch
On the Base
The
RINGER
setting affects only the
ringer on the base. To turn off the ring-
er on the base, set
RINGER
on the back
of the base to
OFF
.
To turn on the ringer on the base, set
RINGER
to either
LO
or
HI
as desired.
When you place the handset on the
base and set
RINGER
to
OFF
, the ET-
925 does not ring when it receives a
call. However, other phones connect-
ed to the same phone line still ring.
USING A HEADSET
You can make or answer calls with
hands-free convenience using an op-
tional headset that has a
3
/
32
-inch (2.5
mm) plug. We recommend Ra-
dioShack Cat. No. 43-194, which is
specially designed for use with the ET-
925.
43-1095.fm Page 12 Tuesday, August 17, 1999 3:37 PM