Filter
Top Products
10
CONNECTING AND
CHARGING THE
BATTERY PACK
The ET-925 comes with a recharge-
able nickel-cadmium battery pack in
the handset. Before using your phone,
you must connect the battery pack and
then charge it for about 14 hours.
1. Remove the screw on the battery
compartment cover, then press
down and slide the cover in the di-
rection of the arrow to remove it.
2. Plug the battery pack’s connector
into the socket in the compart-
ment. The connector fits only one
way.
3. Replace the cover, then reinsert
and tighten the screw.
To charge the battery pack, simply
place the handset on the base.
The CHARGE indicator on the base
lights.
Recharge the battery pack when the
handset beeps and the TALK/BATT
LOW indicator flashes during a call.
Notes:
• If the CHARGE indicator does not
light when you place the handset
on the base, be sure the battery
pack and AC adapter are correctly
and securely connected. Be sure
the charging contacts on the
handset and the base are making
contact.
Also, check the charging contacts
on the handset and the base. If
the contacts are dirty or tarnished,
clean them with a pencil eraser.
CHARGE Indicator
43-1095.fm Page 10 Tuesday, August 17, 1999 3:37 PM