Filter
Top Products
19
3. When the service answers, press
TONE
( ). Any additional numbers
you dial are sent as tone signals.
4. When you hang up, the phone auto-
matically resets to pulse dialing.
USING PAGE/INTERCOM
You can use the ET-687 as a two-way
pager and intercom between the base and
the handset. This is useful if the handset is
away from the base and you want to lo-
cate it, or if you want to have a conversa-
tion between someone with the handset
and someone at the base.
To page the base from the handset,
press
INTCM
. The base and handset
ring. Press
INTERCOM
on the base to an-
swer the page. Both line indicators on
the handset light, and the CHARGE indi-
cator on the base lights.
To page the handset from the base,
press
INTERCOM.
The handset and base
ring. Press
INTCM
on the handset to an-
swer the page. Both line indicators on
the handset light, and the CHARGE indi-
cator on the base lights.
To end an intercom call, press
INTCM
on
the handset, press
INTERCOM
on the
base, or hang up the handset.
During a call, you can page someone at
the base or the handset. Press
INTER-
COM
(on the base) or
INTCM
(on the
handset). The current call is put on hold.
• To transfer the call, press
INTER-
COM
or
INTCM
again when the per-
son at the handset or base answers.
• To start a three-way call, tell the per-
son at the base or handset to press
LINE 1
(or
LINE 2
), then press the
same button twice on your keypad
when they answer the page.
Notes:
• You cannot page the base or hand-
set if it is already in use. You will
hear a warning tone.
43-687.fm Page 19 Friday, August 13, 1999 11:12 AM