Filter
Top Products
11
6. Align the bracket’s keyhole slots
with the mounting screws and slide
the base downward to secure it.
7. Connect the phone cord(s) to the
modular phone line jack(s).
8. Plug the adapter into a standard AC
outlet.
9. Press and lift out the handset
holder, flip it over as shown, then
snap it back into place.
10. Lift the base’s antenna to a vertical
position.
CONNECTING AND
CHARGING THE BATTERY
PACK
The ET-687 comes with a rechargeable
nickel-cadmium battery pack in the
handset but not connected. Before using
the phone, you must connect the battery
pack, then charge it for about 24 hours.
1. Press down and slide off the battery
pack compartment cover as shown.
2. Unfasten the plastic retainer strap
and lift the battery pack out of the
compartment.
3. Plug the battery pack’s connector in-
to the socket in the compartment
(the connector fits only one way),
then replace the battery pack and
fasten the retainer strap.
43-687.fm Page 11 Friday, August 13, 1999 11:12 AM