Filter
Top Products
16
Changing the Channel
If you notice interference, static, or
noise during a call, press
CH
(channel)
to find a clearer channel.
The ET-598 changes to a different
channel each time you press
CH
.
Note
: If the handset is too far away
from the base, the channel might not
change. Move closer to the base and
try again.
SPEAKERPHONE
OPERATION
Making a Call
To make a call using the speaker-
phone, simply press
SPEAKER
. The
SPEAKER indicator and either the
LINE 1 or LINE 2 indicator light on the
base. The indicator for the same line
flashes on the handset as a reminder
that the line is in use. Use the base
keypad to dial the desired number.
You can also press
LINE 1
or
LINE 2
to
directly select the line you want to use.
If either indicator is flashing, someone
at the handset is using the line. Press
the line button whose indicator is not
lit.
Answering a Call
To answer a call using the speaker-
phone, simply press
SPEAKER
or ei-
ther
LINE 1
or
LINE 2
, whichever is
flashing. The SPEAKER indicator and
the selected line indicator light. The in-
dicator for the line in use flashes on the
handset.
To end a speakerphone call, simply
press
SPEAKER
. The SPEAKER and
line indicators turn off.
Note:
When you receive an incoming
call on a line while you are talking on
the speakerphone on the other line,
the line indicator for the incoming call
flashes. Place the current call on hold,
then press the line button for the in-
coming call.
HOLD
43-698a.fm Page 16 Friday, August 13, 1999 12:56 PM