Radio Shack ET-1125 Cordless Telephone User Manual


 
22
TROUBLESHOOTING
We do not expect you to have any problems with your phone, but if you do, these
suggestions might help.
Problem Suggestion
The phone does not work or
works poorly.
Be sure the base’s phone line cord and AC
adapter are correctly and securely connected.
Be sure the battery pack in the handset is con-
nected and charged.
Return the handset to the base for about 5 sec-
onds to reset the security access-protection
code.
The display flashes slowly
when the handset is faceup on
the base.
Make sure the battery pack in the handset is
properly connected.
The handset stops working or
works poorly during a call.
Move the handset closer to the base.
Lift the base’s antenna to a fully vertical position.
Be sure the handset’s battery pack is charged.
(If the battery pack power is too low, the handset
cannot display
Low
Battery
.)
Low volume or unusual
sounds.
Someone has picked up another phone on the
same line. Hang up the other phone.
Dropout or mute. Keep the handset away from computers, remote
control toys, wireless microphones, alarm sys-
tems, intercoms, room monitors, fluorescent
lights, and electrical appliances.
Move to another location or turn off the source of
interference.
Press
CH/SELECT
to change the channel.
Hang up and redial the number.