Filter
Top Products
9
Charging the Battery Pack
Before you use the battery pack for the
first time, you must use the supplied bat-
tery charger to charge it for about 12 to
14 hours to bring it to a full charge.
You cannot use the transceiver while you
charge the battery pack.
Caution: The supplied battery charger
was designed specifically for your trans-
ceiver. Use only the supplied battery
charger.
Follow these steps to charge the battery
pack.
1. Turn VOLUME fully counterclock-
wise to OFF to make sure power is
turned off.
2. Pull out the rubber cover over the
CHRG jack on the side of the trans-
ceiver, and insert the charger’s bar-
rel plug into the jack. Then plug the
illus -
show
VOLUME
other end of the charger into a
standard AC outlet.
If the RX/TX indicator lights yellow
when the transceiver’s power is on and
you press PUSH TO TALK, recharge
the battery pack.
illus - show barrel plug/
charger. Show plug being
plugged into CHRG and
AC plug about to be
an AC outlet
plugged into
illus - show
front of
RX/TX lit on
PTT and
transceiver
19-1206.fm Page 9 Tuesday, August 3, 1999 10:50 AM