Filter
Top Products
7
Your transceiver might cause TV or radio
interference even when it is operating
properly. To determine whether your
transceiver is causing the interference,
turn off your transceiver. If the interfer-
ence goes away, your transceiver is
causing it. Try to eliminate the interfer-
ence by:
• moving your transceiver away from
the receiver
• contacting your local RadioShack
store for help
If you cannot eliminate the interference,
the FCC requires that you stop using
your transceiver.
Additional FCC Regulations
The Business Radio Service is under the
jurisdiction of the Federal Communica-
tions Commission (FCC). Any adjust-
ments or alterations that would alter the
performance of the transceiver so it no
longer meets the original FCC type ac-
ceptance or would change the frequen-
cy-determining method are strictly
prohibited.
Replacement or substitution of crystals,
transistors, ICS, regulator diodes, or any
other component that is of a unique na-
ture with components other than those
recommended can violate the technical
regulations of the FCC rules or violate
type acceptance requirement of the
rules.
Before you operate the transceiver,
you must obtain your license. It is ille-
gal to transmit without the appropriate
license, which you can get by submit-
ting a completed FCC Form 600 to the
FCC (or through the PCIA). Further-
more, you are required to understand
Part 90 of the FCC Rules and Regula-
tions prior to operating your transceiv-
er. It is the user’s responsibility to see
that this unit is operating at all times in
accordance with the FCC Rules and
Regulations.
19-1206.fm Page 7 Tuesday, August 3, 1999 10:50 AM