Filter
Top Products
Answering System Operation
33
second of playback and plays the previous second,
until the beginning of the message. Release
|
6
to
resume normal playback.
To replay the previous message
, press
|
6
within
about 2 seconds (4 seconds during remote
operation) after a message begins playing. If the
current message is the first new message, the
system plays back from the beginning of the current
message (it does not go back into the old message
group).
#&,756+0)"6*'"81.7/'
To adjust the speaker’s volume, repeatedly press
VOL
8
or
9
on the base. The volume setting from
&
&&
&
(lowest) to
/
//
/
(highest) appears.
&'.'6+0)"/'55#)'5
To delete the current message while it is playing,
press
CH/DEL
. The system beeps.
To delete all messages, while messages are not
playing, press
DELETE
. The system beeps and
announces, “To delete all messages, press
DELETE
again.” Within 30 seconds, press
DELETE
. The
system beeps, the display clears momentarily, then
&
&&
&
appears.
±ý
4'/16'"12'4#6+10
While you are away from your home or office, you
can use a touch-tone phone, or a pulse (rotary)
phone with a pocket tone dialer (available through
RadioShack), to enter your security code and do
any of the following:
• Set the system to answer or not answer calls.
• Listen to your messages.
• Record a new outgoing message.
• Record a memo.
• Erase messages.
±ý
±
"016'"
±
"
±ý
Deleting Messages
You cannot delete new
(unplayed) messages. If
you try to delete all
messages while you still
have new messages, the
system beeps and
announces “Please play
back all messages.”
±
Remote Operation
You cannot remotely
operate the system using its
handset or another
telephone on the same line.