Filter
Top Products
Answering System Operation
27
5'66+0)"6*'"&#;16+/'
You must set the day and time so the system can
record the correct day and time of each message.
±ý
1. Press
MENU
once. The system announces
“Time,” then the currently set time, day, and the
day’s number (
'
''
'
for Sunday,
(
((
(
for Monday, and
so on) appear.
2. Repeatedly press
7
|
on the base to move
forward or
|
6
to move backward until the
correct day appears, then press
SET/RING
. The
system announces and displays the hour.
3. Repeatedly press
|
6
or
7
|
until the correct
hour appears, then press
SET/RING
. The
system announces and displays the minutes.
4. Repeatedly press
|
6
or
7
|
until the correct
minutes appear, then press
SET/RING
. The
system announces “AM” or “PM,” and
7
77
7
or
F
FF
F
appears.
5. Press
|
6
or
7
|
to choose AM or PM, then
press
SET/RING
. The system beeps and
announces “Time,” then announces the
currently set day and time.
To check the day and time, press
MENU
once. The
system announces the currently set day and time.
±ý
5'66+0)"6*'"07/$'4"1("4+0)5
You can select how long the system waits to
answer a call — 2, 4, or 6 rings, or toll-saver. If you
plan to check messages by long distance, set the
ring time to toll-saver (see “Using the Toll-Saver” on
Page 34).
1. Press
MENU
three times. The system
announces “Ring time” followed by the current
±
"016'"
±
"
Enter each key press within
about 2 minutes.
Otherwise, the system exits
the time setting process
and you must begin again
with Step 1.
±
"016'"
±
"
If power fails, the clock
retains the current time.
When the power is
restored, it starts counting
again from the time the
power failed.