Filter
Top Products
Installation
11
RadioShack’s involvement in this program is part of
the company’s commitment to preserving our
environment and conserving our natural resources.
5'66+0)"6*'"&+#.+0)"/1&'
Your phone comes set for tone dialing. If you have
pulse service, you need to change the dialing mode.
If you are not sure which type of service you have,
do this test:
1. Lift the handset, press
TALK/FLASH
, and listen
for a dial tone.
2. Press any number other than
0
or, if required,
an outside line access code (9, for example).
If the dial tone stops,
you have touch-tone
service.
If the dial tone continues
, you have pulse
service.
Once you have determined which type of service
you have, set the dialing mode.
1. Press
END
to hang up the phone if necessary,
then hold down
CID/MENU
until the selection
screen appears.
2. Press 4 or
9
three times to select
:_Wb
:_Wb:_Wb
:_Wb
.
3. Press
SEL
to toggle between
Jed[ý
Jed[ýJed[ý
Jed[ý
and
F kbi[
F kbi[Fkbi[
F kbi[
.
±ý
If the battery power is too low, the dial mode might
reset to tone. If you are on a pulse line and cannot
make a call, try re-setting the dialing mode to pulse.
±
"016'"
±
"
The phone exits setting
mode if a call or page is
received, or if you press
END.