Radio Shack 43-3823 Cordless Telephone User Manual


 
33
Troubleshooting
TROUBLESHOOTING
If your phone is not performing to your expectations, please try these simple
steps first .
Problem Solution
The CHARGE/IN USE
LED won’t illuminate
when the handset is
placed on the base.
Make sure the AC adapter is plugged into the base and wall
outlet.
Make sure the handset is properly seated on the base.
Make sure the charging contacts on the handset and base are
clean.
The audio sounds weak
and/or scratchy.
Make sure that the base antenna is in a vertical position.
Move the handset and/or base to a different location away
from metal objects or appliances and try again.
Press CHANNEL in the Talk mode to help eliminate
background noise.
Make sure that the handset is not too far from the base.
Can’t make or receive
calls.
Check both ends of the telephone line cord.
Make sure the AC adapter is plugged into the base and wall
outlet.
Disconnect the AC adapter for a few minutes, then reconnect it
Make sure that the handset is not too far from the base.
The handset doesn’t ring
or receive a page.
The battery pack may be weak. Charge the battery for 24
hours.
The handset may be too far from the base unit.
Place the base unit away from appliances or metal objects.
Severe noise
interference.
Keep the handset away from microwave ovens, computers,
remote control toys, wireless microphones, alarm systems,
intercoms, room monitors, fluorescent lights, and electrical
appliances.
Move to another location or turn off the source of interference.
The answering system
does not work.
Make sure the base unit is plugged in.
Make sure the answering system is turned on.
Cannot record any
messages.
Set the record time to either the one minute or four minute
option.
The memory may be full. Delete some or all of the saved
messages.
43-3823.FM Page 33 Thursday, March 27, 2003 10:22 AM